Subscribe to us:

The bumper corner CG76–CG76A

CG76 – CG76A Corner bump for hospitals

Vinyl bump on an aluminum frame, great for hospitals, emergency rooms and emergency care departments and emergency medical services. This system is used to protect the corners and is the widest of the entire line of corner bumpers that allows to protect the corner from impact with a gurney, wheelchair, stretcher, trolley and other things. And also ideal in surgeries, intensive care units, neurological departments, Elevator openings and other weak and highly passable areas.

Accessories:

  • Vinyl profile 2 mm
  • Aluminum profile
  • Plug

Installation:

  1. To determine the point the height of the protective element for the corner.
  2. Default ARFEN supplies a 3-meter items vinyl and aluminum, so once is enough to cut and frame and vinyl, and get two ready-made elements by 1.5 m to protect the two corners. Generally above 1.5 m, protection of the angles is not needed. Note: to clearly Cut at 90 degrees
  3. To cut aluminum profile in size.
  4. When installing on plasterboard walls and brick-drill holes first in aluminum, and then through the wall.
  5. Or mount the frame above the floor according to the thickness of the lower stub or mount the protective frame from the floor, tearing the baseboard in the corner. In the latter case, the bottom plug is not necessary; Drywall: 4x50 mm screw, mounting to the profile of the drywall. Concrete wall: 4x50 mm screws and 6 mm anchors. Brick: 4x50 mm screw and a 6 mm dowel. Install the plugs.
  6. Measure and cut vinyl molding to conform to plugs note: bottom plugs. Without aluminium should fit snugly to the floor below vinyl trim didn't come down.
  7. Install vinyl on an aluminum frame. Important: Store material in a clean and dry place at a temperature between 10 ° C - 40 ° C.

Note: This model has a complete set of only finite elements.

Model The length of the profile Profile width The thickness of the profile Begree of angle The number of shock absorbing inserts Finite element The number of possible colors
CG50 3 m 25x25 mm 10 mm 90° - WG012 5 colors*
CG51 3 m 53,6x53.6 mm 12 mm 90° - WG037 5 colors*
CG76 3 m 76x76 mm 10 mm 90° - WG008 5 colors*
CG76A 3 m 76x76 mm 10 mm 135° - WG009 5 colors*

* all color palette consists of 32 colors and is available for orders of 300 m. p. of each item